Anyone use a paintless dent removal service?

fallen tree insurance claim Oct 20, The best way to remove these bushings is to use a torch and set the rubber on fire. Let it burn one to two minutes then hit the eye so the rubber and the inner sleeve falls out.

Then use a punch and a hammer and catch the end of the outer sleeve and curl it stumpmulching.barted Reading Time: 1 min. Oct 15, How to Replace Leaf Spring Shackles and Bushings 1. Block the front wheels and raise the rear with a jack under the third member, lowering the vehicle onto stands under 2.

Keep the jack under the rear end. Do one end of a single spring at a time, removing the. Removing The Bushing: Forum member ‘BlackBII’ used a hole saw to cut the bushing from both sides.

There’s still going to be some rubber left. You can burn out what’s left. Some people torch these out which is even quicker, just be sure to not damage the spring itself. You’ll likely end up with the bushings metal sleeve still in the spring. Jan 16, stumpmulching.bar=as_li_tl?ie=UTF8&tag=fintechcomm0f&camp=&creative=&linkCode=as2&creativeASIN=&linkId= Step 1. Remove the bushings from the spring eyes using a dead blow hammer and appropriately sized socket to drive the bushings free.

If any of the bushings are seized to the spring eyes (this is not uncommon) you may need to apply heat to free them from the spring.